MARTIN® APRON SEAL™ Skirting System

Forms Effective, Low-Maintenance, Multiple-Layer Seal to Keep Fines on Belt.

Dual Seal Effectiveness

No high pressure against the conveyor belt.

Primary Seal Forms Inner Barrier

Keeps material inside the chute.

Secondary Seal Captures Fines

Ribs carry fines down the belt.

Minimal Adjustment

Internal elasticity provides sealing force.

Long Life, Low Maintenance

Low pressure means effective performance over long life.

Systems To Fit Needs

Available in 1-Piece, 2-Piece, and XHD versions to suit application.

Minimal Belt Space Required

Uses as little as 2.5 inches (65 mm) on each side of belt.

Ideal Replacement System

Works with virtually any clamps.

MARTIN® Conveyor Transfer Points are custom-engineered by Martin Engineering to eliminate blockages, reduce impact, centralize loading and guarantee the material flow rate.

More Information

Ask a question about MARTIN® APRON SEAL™ Skirting System
Request a price for MARTIN® APRON SEAL™ Skirting System
Order Literature for MARTIN® APRON SEAL™ Skirting System
Request a printed manual for MARTIN® APRON SEAL™ Skirting System
Print this page

Downloadable Files

Attachment
Operator Manual for MARTIN® APRON SEAL™ Skirting System - M3248 Installation, operation and maintenance instructions for MARTIN® APRON SEAL™ Skirting System
Tech Data Sheet for MARTIN® APRON SEAL™ Skirting System - L3298-10 Specifications for MARTIN® APRON SEAL™ Skirting System.
MARTIN® Sealing Systems Selection Guide - L3636 Guide to choosing the right sealing system for your application.
Drawing S35833 MARTIN® 1-Piece Heavy-Duty APRON SEAL™ Skirting System and Angle Clamp Drawing
Drawing S32045-L Installation of Low Profile Angle Clamp Weldment with MARTIN® APRON SEAL™ Skirting System Drawing
Drawing S32045 Installation of Angle Clamp with MARTIN® APRON SEAL™ Skirting System Drawing
Drawing S32247-R Installation of Angle and Torsion Arm Clamp with Rubber MARTIN® APRON SEAL™ Drawing
Drawing S34359 Installation of Heavy Duty MARTIN® APRON SEAL™ and Angle Clamp Weldment Drawing
Drawing S35871 Installation of 1-Piece Standard MARTIN® APRON SEAL™ and Angle Clamp Drawing
Drawing S35871-G Installation of 1-Piece Standard MARTIN® APRON SEAL™ and Angle Clamp Drawing
Drawing S35871-N Installation of 1-Piece Standard MARTIN® APRON SEAL™ and Angle Clamp Drawing
Drawing S37455 Angle & Torsion Arm Clamp with Rubber MARTIN® APRON SEAL™ and Quick Release Clamp Installation Drawing
Drawing S37456 Low Profile Angle Clamp with 1-Piece MARTIN® APRON SEAL™ and Quick Release Clamp Installation Drawing
Drawing S37464 1-Piece MARTIN® APRON SEAL™ and Quick Release Clamp Installation Drawing
Drawing S50029 1-Piece Standard MARTIN® APRON SEAL™ with Quick Release Clamps Installation Drawing
Drawing S50042 1-Piece Heavy-Duty MARTIN® APRON SEAL™ with 6.00 Hi Back Installation Drawing
Drawing S50044 1-Piece Heavy-Duty MARTIN® APRON SEAL™ with 6.00 Hi Back & Quick Release Clamps Installation Drawing