MARTIN® Dual Dust Curtain

Creates A Buffer Zone To Slow Air Movement for Dust Control

Installed at the exit of the conveyor load zone, MARTIN® Dual Dust Curtain provides effective sealing to prevent the escape of airborne fines. Mounted in the skirtboard cover, the dust curtains help create a plenum for dust suppression and dust collection. Recommended installation is one dust curtain without slits closest to loading zone, followed by one dust curtain with slits at exit of skirtboard. Additional dust curtains may be installed to reduce air movement and isolate dust suppression or dust collection systems for additional dust control.

Allows Dust to Settle

Curtains form a plenum that slows air velocity, allowing airborne particles to return to belt.

Adjusts To Material Flow

Slit curtains conform to belt load without pushing material off conveyor.

Minimizes Air Flow

Curtains hang to 1 inch (25 mm) below normal material profile on belt.

Simple Replacement

Curtain bolts into steel frame for simple replacement.

Long Lasting

Rugged 1/4-inch (6 mm) rubber construction provides extended service in tough conditions.

 

MARTIN® Dust Management Systems solve the problem of airborne dust by keeping fine particles in the load or by returning them to the main material body.

MARTIN® Dust Management Technologies include systems and components for dust collection and dust suppression.

Martin Engineering will take "single source" responsibility for your dust control systems. From system design, hardware manufacturing, system installation, operator training, consumable chemicals supply, and system maintenance, Martin Engineering provides the "Total Solution" to dust management.

More Information