CleanScrape® Secondary Cleaner

The CleanScrape® Secondary Cleaner is an all stainless steel assembly featuring independent 6-inch wide blades with carbide tips. Each tip is supported on spring-loaded arms at both ends. The load springs allow independent blade rotation back and forward as well as up and down. This range of motion provides equal load pressure across each blade, absorbs obstructions, conforms to ever-changing belt undulations, and is able to arc safely in the event of reversing belt direction or belt rollback.

  • Optimum cleaning results
  • "Free flow" design allows for material to pass through arms
  • Crowned mainframe design compensates for belt wear in the center
  • Low blade-to-belt pressure
  • Simple installation inside or outside of chute
  • Removed material returns to main flow
  • Requires less tensioning over lifespan
  • Handles reversing belts and belt rollback without damaging belt
  • Easy cartridge removal
  • Easy adjustment of cleaning pressure

Product Specifications

Belt Width 18-96 in (450-2400 mm)
Belt Speed 900 fpm (5 m/s) for vulcanized splices
600 fpm (3 m/s) for mechanical splices
Temperature Up to 600 degrees F
Corrosive Conditions YES
Underground Applications YES
Compatible with Reversing Belts or Roll Back YES
Accommodates Mechanical Splices YES

Resources

Brochure - Belt Cleaners Download
Tech Data Sheet - CleanScrape® Secondary Cleaner Download
Operator Manual - CleanScrape® Secondary Cleaner Download
Drawing - CleanScrape® Secondary Cleaner Download
Drawing - CleanScrape® Secondary Cleaner Download
Drawing - CleanScrape® Secondary Cleaner STS Download
Drawing - CleanScrape® Secondary Cleaner STS Download

View Additional Resources

Wait! Consider Our Free Expert Assistance For Any Technical Decisions...
9 out of 10 customers benefit from our expert advice. We highly suggest you take advantage of this Free Assistance to ensure proper product selection and consideration of all components needed to solve your problem. Use the contact options below to get started!