Secondary Cleaners


Installed at the point where the belt is leaving the discharge pulley, secondary belt cleaners remove residual fines that remain on the belt past the primary belt cleaner. Its location is typically close enough to the material trajectory that the cleanings will return to the main material stream.

Additional tertiary belt cleaners can be installed to provide final cleaning. These cleaners can be the same model as the secondary belt cleaner, or of a different design to allow efficient cleaning and maintenance within the available space.

As these belt cleaners are typically installed away from the pulley, they should be placed at or near a point where the belt is against a roller. Firm support prevents the cleaning pressure from raising the belt line and reducing cleaning efficiency.

Martin® Belt Cleaning SolutionsMartin® Belt Cleaning SolutionsMartin® Belt Cleaning Solutions

Contact Us!

1 (866) 360-7417
100% Money-Back Guaranteed
By submitting this form, you accept the Mollom privacy policy.

Product Max Belt Speed Max Belt Width
1000 fpm (5.1 m/s) Up to 96 in (up to 2400 mm)
1200 fpm (6.1 m/s) Up to 126 in (up to 3200 mm)
1200 fpm (6.1 m/s) Up to 126 in (up to 3200 mm)
750 fpm (3.8 m/s) Up to 96 in (up to 2400 mm)
1000 fpm (5.1 m/s) Up to 96 in (up to 2400 mm)